Author Topic: AHM 500 FRONT MOUNTED INTERCOOLER AND COLD AIR INTAKE  (Read 650 times)

0 Members and 1 Guest are viewing this topic.

Offline AHM

  • Barely Abarth
  • *
  • Posts: 14
  • Thanks: 0
  • AHM
    • View Profile
    • www.alfacare.co.uk
AHM 500 FRONT MOUNTED INTERCOOLER AND COLD AIR INTAKE
« on: May 28, 2016, 02:15:09 PM »
AHM front mounted intercooler and cold air intake

We came up with this a few years back as the std coolers
are really restrictive, Abarth now
offer almost the same thing on the new 695 as std :)

By removing the std coolers and fitting our cooler kit
(in this case we do use the forge kit as it fits very well,
and is well priced.

Then we then add a cold air feed from the std air box fitted with
a high flow filter to the o/s bumper vent, where the std coolers were .
We set the intake high so water is not a problem
We have a adapter made to fit the air box and relocate the washer bottle to the other side

AHM Cold air intake can only be fitted to non Zenon head lamp cars

Picks below :)
595 180 Comp with performance pack inc Plate LSD, 220 BHP AHM power upgrade,  AHMs own  Lowered uprated springs,  AHM Cat back exhaust system.